User Manual Q&AAnswer
Feb 09, 2025 - 11:52 PM
If your KitchenAid W11349453A dishwasher is not cleaning dishes properly, there are a few troubleshooting steps you can take:
1. Check the spray arms: Make sure the spray arms are not clogged or blocked by any debris. Remove the spray arms and clean them thoroughly with warm, soapy water. Rinse them off and ensure that the spray nozzles are clear.
2. Check the filters: The dishwasher has filters that prevent food particles from clogging the spray arms and affecting the cleaning performance. Remove the filters and clean them under running water. Make sure there are no obstructions or buildup on the filters.
3. Check the water temperature: Ensure that the water entering the dishwasher is hot enough. The recommended temperature is between 120°F (49°C) and 150°F (66°C) for optimal cleaning. If the water is not hot enough, you may need to adjust your water heater settings.
4. Use the correct detergent: Make sure you are using a high-quality dishwasher detergent that is suitable for your water hardness. Follow the manufacturer's instructions for the recommended amount of detergent to use.
5. Load the dishwasher properly: Ensure that the dishes are loaded correctly, allowing proper water circulation. Avoid overcrowding the dishwasher and blocking the spray arms. Also, make sure that no large food particles are left on the dishes before loading them into the dishwasher.
If the issue persists after trying these troubleshooting steps, it is recommended to contact the KitchenAid Customer eXperience Center for further assistance. They can provide additional troubleshooting guidance or arrange for service if necessary.
Add New Comment