User Manual Q&AAnswer
Feb 09, 2025 - 11:37 PM
To assemble the VALUE 19 Inch Wall Housings Foldable Mount Rack, please follow these steps:
1. Open the box and remove the wall housing. Place it on the rear side.
2. Fold out the hinged side panels and take out the accessory parts from inside.
3. Assemble the bottom sheet using the special plastic rivets. Note that the bottom sheet does not have fan cutouts.
4. The hinges and lock parts are pre-assembled on the glass door. Be careful not to damage the glass while handling.
5. Attach the glass door to the bottom of the case.
6. Assemble the roof sheet using the special plastic rivets. The roof sheet has fan cutouts.
7. Bend the tabs as shown in the figure provided.
8. Your wall housing is now ready to use.
Please refer to the provided assembly guide for visual instructions and additional details.
Add New Comment