User Manual Q&AAnswer
Feb 09, 2025 - 11:23 PM
To adjust the detection area of the microwave sensor on the ENLITE EN-BA1 Series Batpac Pro 1500mm 33w Led Batten, you need to select the appropriate combination on the DIP switches. The DIP switches allow you to customize the detection area to fit your specific application. By toggling the switches on or off, you can reduce the detection area as needed. Please refer to the installation instructions provided in the manual for more details on how to adjust the DIP switches.
It is important to note that the installation should be carried out in accordance with the current edition of the National Wiring Regulations. If you are unsure, it is recommended to consult a qualified electrician for assistance. Additionally, make sure to switch off the electricity at the mains before commencing installation or maintenance.
Please remember that this luminaire is for indoor use only and must be earthed as it is a Class I, mains voltage product. Also, note that this luminaire is not dimmable.
If you have any further questions or concerns regarding the installation or usage of the ENLITE EN-BA1 Series Batpac Pro 1500mm 33w Led Batten, you can contact Enlite directly through their provided contact information.
Add New Comment