User Manual Q&AAnswer
Feb 09, 2025 - 11:19 PM
To connect the GL-C-009P Single Color LED Controller Dimmer to a power supply, please follow these steps:
1. Ensure that the power supply you are using is a 12–54 VDC power supply. The voltage of the power supply must match the voltage required by the controller and any connected lights.
2. Before connecting or disconnecting any components, make sure the power supply is not plugged into an outlet.
3. Strip the wires according to the recommendations printed on the controller.
4. With the supply power off, use a screwdriver to securely connect the wiring to the correct terminals on the controller.
By following these steps, you will be able to properly connect the GL-C-009P Single Color LED Controller Dimmer to a power supply. Remember to always observe proper polarity when connecting the wiring.
Add New Comment