User Manual Q&AAnswer
Feb 09, 2025 - 11:12 PM
To connect the Paul Neuhaus 7485-95 Q-SPIDER Power Supply, please follow these steps:
1. Ensure that the power supply is disconnected from the electrical outlet before starting the installation process.
2. Identify the electrical connection terminals on the power supply. These terminals are typically labeled with positive (+) and negative (-) symbols.
3. Strip the insulation from the end of the DC power cable wires, exposing the bare copper strands.
4. Connect the positive (+) wire from the DC power cable to the positive (+) terminal on the power supply. This is usually indicated by a red color or a "+" symbol.
5. Connect the negative (-) wire from the DC power cable to the negative (-) terminal on the power supply. This is typically indicated by a black color or a "-" symbol.
6. Ensure that the wire connections are secure and properly tightened. Loose connections may result in electrical issues or damage to the power supply.
7. Once the connections are made, double-check that there are no exposed wires or loose strands that could cause a short circuit.
8. After verifying the connections, plug the power supply into a suitable electrical outlet.
Please note that the above instructions are general guidelines. For specific details and illustrations, it is recommended to refer to the instruction manual provided by Paul Neuhaus GmbH.
Add New Comment