How do I install the FISHER PAYKEL HC30PHTX1 N 30 Inch Wall Range Hood? (FISHER & PAYKEL HC30PHTX1 N Wall Range Hood User Guide)

Answer

manuals.plus

Feb 09, 2025 - 11:03 PM


Installing the FISHER PAYKEL HC30PHTX1 N 30 Inch Wall Range Hood is relatively easy. Here are the steps to follow:

1. Determine the installation type: The range hood can be either externally ducted or internally recirculated. Choose the installation type that suits your kitchen setup.

2. Prepare the mounting area: Ensure that the wall where you plan to install the range hood is sturdy and can support the weight. Also, make sure there is enough clearance above the cooking surface.

3. Install the chimney: Attach the upper and lower chimney sections to the range hood. Adjust the height of the chimney according to your kitchen's ceiling height.

4. Mount the range hood: Securely attach the range hood to the wall using the provided mounting brackets and screws. Make sure it is level.

5. Connect the ducting: If you are externally ducting, connect the ductwork from the range hood to the exterior vent. If you are internally recirculating, install the recirculation diverter.

6. Install the filters: Insert the mesh filters into the range hood. These filters trap grease particles during extraction.

7. Power connection: Connect the range hood to a suitable power supply. The supply voltage required is 120V.

8. Test the range hood: Turn on the range hood and test all the fan speeds to ensure proper functionality.

For more detailed instructions and diagrams, please refer to the FISHER PAYKEL HC30PHTX1 N 30 Inch Wall Range Hood User Guide provided by the manufacturer.