Answer

Feb 09, 2025 - 10:42 PM
To zero the display on the SILCA SIAMPU012ASY0100 the Truth Digital Pressure Gauge, follow these steps:
1. Disconnect the gauge from any pressure source.
2. Press and hold the Zero button for 2 seconds until the LCD displays "- - -".
3. Release the Zero button.
If the display does not re-zero after pressing the Zero button, it indicates that the unit is no longer meeting the specified accuracy and should be sent back to SILCA for calibration. It is important not to use the Zero button when pressure is applied.
Please refer to the "OPERATIONS INSTRUCTIONS" section in the instruction manual for more details and the flow chart provided.
Add New Comment