User Manual Q&AAnswer
Feb 09, 2025 - 10:28 PM
To adjust the seat in the Link-Belt 80X3 Spin Ace Excavator cab, follow these steps:
1. Locate the fully-adjustable KAB seat in the cab.
2. To adjust the seat forward or backward, use the lever located underneath the seat. Pull the lever up to unlock the seat, then slide the seat to the desired position. Release the lever to lock the seat in place.
3. To adjust the seat height, use the lever located on the side of the seat. Pull the lever up to unlock the seat height adjustment, then raise or lower the seat to the desired position. Release the lever to lock the seat height in place.
4. To adjust the armrest angles, use the adjustment knobs located on the sides of the armrests. Turn the knobs to adjust the armrests to the desired angle.
5. To adjust the lumbar support, use the lumbar support adjustment xxxx located on the side of the seat. Turn the xxxx to increase or decrease the lumbar support.
6. The seat also has suspension for added comfort. Adjust the suspension settings using the suspension adjustment xxxx located on the side of the seat.
Please refer to the Link-Belt 80X3 Spin Ace Excavator Instruction Manual for more detailed instructions and illustrations on adjusting the seat in the cab.
Add New Comment