How do I install the telescopic slides and side racks in the Westinghouse WVEP618 oven? (Westinghouse WVEP618 60cm 14 Pyrolytic Steam Assist Oven User Guide)

Answer

manuals.plus

Feb 09, 2025 - 10:18 PM


To install the telescopic slides and side racks in the Westinghouse WVEP618 oven, follow these steps:

1. Install the telescopic slides (if supplied) to the side racks. Refer to the installation guide supplied with the slides for detailed instructions.

2. Insert the side racks into the oven. There is a left-hand and right-hand version of the side racks.

   a. Insert the rear peg of the side rack into the rear access hole, ensuring it is fully inserted.
   
   b. Locate the front peg of the side rack into the front access hole and push it in firmly.

To fit a shelf or tray to the side racks:

1. Locate the rear edge of the shelf or tray between the guide rails of the side rack. Ensure that the same rail positions on both sides of the oven are engaged.

2. With the front edge raised, slide the shelf or tray into the oven.

3. Once the detents have passed the front edge of the side rack, the shelf or tray can be pushed completely in.

To fit a shelf or tray to the telescopic slides (if supplied):

1. Push the shelf or tray along the top of the slide until it hits the back post.

2. Drop the front of the shelf or tray onto the slide, ensuring it sits behind the front post of the slide.

3. When fully inserted, the shelf or tray should not interfere with the closed oven door.

For more detailed information and illustrations, please refer to the user manual of the Westinghouse WVEP618 oven available online at westinghouse.com.au/manuals.