How do I install the OSRAM 64210DA05 Auto Night Breaker H7-LED Adapter? (OSRAM ‎ 64210DA05 NIGHT BREAKER H7-LED Adapter Instruction Guide)

Answer

manuals.plus

Feb 09, 2025 - 10:16 PM

To install the OSRAM 64210DA05 Auto Night Breaker H7-LED Adapter, please follow these steps:

1. Ensure that the vehicle's engine is turned off and the headlights are cool before starting the installation process.

2. Locate the existing H7 halogen bulb in your vehicle's headlamp assembly and remove it by gently twisting it counterclockwise and pulling it out.

3. Take the OSRAM 64210DA05 Auto Night Breaker H7-LED Adapter and align it with the headlamp socket. Insert the adapter into the socket and twist it clockwise until it is securely in place.

4. Once the adapter is properly installed, take the OSRAM LED bulb and insert it into the adapter, making sure it is aligned correctly. Gently push the bulb into the adapter until it is fully seated.

5. Ensure that all parts are fixed properly and do not interfere with any moving parts or functions of the car. Double-check that the adapter and LED bulb are securely in place.

6. Before turning on the headlights, make sure not to stare directly at the operating light source. The cooling element on the back of the adapter will heat up during operation, so exercise caution.

7. It is important to note that changing the headlamp requires readjustment of the factory settings by a qualified workshop. If you have any questions or encounter technical problems during the installation process, it is recommended to contact OSRAM customer service via automotiveservice@osram.com for assistance.

Please refer to the provided manual for any additional information or specific instructions related to the OSRAM 64210DA05 Auto Night Breaker H7-LED Adapter.