How do I install and set up the Paul Neuhaus 819287 28 Watt Halogen Table Light in silver? (Paul Neuhaus 28 Watt Halogen Table Light Instruction Guide Paul Neuhaus 28 Watt Halogen Table Light Instruction Guide)

Answer

manuals.plus

Feb 09, 2025 - 09:55 PM

To install and set up the Paul Neuhaus 819287 28 Watt Halogen Table Light in silver, please follow the instructions below:

1. Unpack the product: Carefully remove the table light from its packaging and ensure that all components are included.

2. Position the light: Choose a suitable location for the table light. It should be placed on a stable and level surface, away from any flammable materials.

3. Connect the power cord: Plug the power cord into a suitable electrical outlet. Ensure that the voltage matches the specifications mentioned on the product label.

4. Install the halogen bulb: Gently insert the 28 Watt halogen bulb into the lamp socket. Make sure it is securely fitted and aligned properly.

5. Turn on the light: Locate the switch or dimmer on the table light and turn it on. The light should illuminate if the bulb is properly installed and the power supply is functioning correctly.

6. Adjust the light direction: If the table light features an adjustable arm or head, you can position it to direct the light where desired. Follow the instructions provided with the specific model to adjust the light direction.

7. Safety precautions: Always ensure that the table light is placed in a safe location and not near any flammable materials. Avoid touching the bulb when it is turned on, as it may become hot. Allow the bulb to cool down before replacing it.

For further information or troubleshooting, please refer to the detailed installation instructions provided by Paul Neuhaus GmbH.