User Manual Q&AAnswer
Feb 09, 2025 - 09:15 PM
To install the PRAXIS M24 BSA Bottom Bracket, follow these steps:
1. Ensure that your BSA frame shell is clean and free of any debris.
2. Apply Anti-Seize to the BB cup threads and frame threads before installing.
3. Thread the Right/Drive cup into the frame's Right/Drive side.
4. Thread the Left/Non-Drive cup with the attached moisture seal into the frame's Left/Non-Drive side.
5. Tighten both cups to 40Nm of torque.
6. Lightly grease the underside of the Dust Covers and place them over the bearings with Praxis logos facing outward.
7. Install the crank according to the crank instructions provided by Praxis Works.
Please note that specific tools and experience are necessary for proper installation, so it is recommended to have the product installed by a qualified bicycle technician. For more detailed instructions, refer to the PRAXIS M24 BSA Bottom Bracket Instruction Manual.
Add New Comment