User Manual Q&AAnswer
Feb 09, 2025 - 08:56 PM
To adjust the brightness and color temperature of the RL Remote Ceiling 10.5W Lights using the remote control, follow these steps:
1. Make sure the light is switched on.
2. Use the brightness regulator button on the remote control to adjust the brightness. Pressing the button for a short period will allow you to control the brightness in stages. Pressing the button permanently will result in reaching the maximum or minimum brightness.
3. To adjust the color temperature, use the mode button on the remote control. Pressing the button for a short period will allow you to control the color temperature in stages. Pressing the button permanently will result in reaching the warmest or coldest color temperature.
4. The remote control offers different preset brightness and color temperature options. Use the corresponding buttons on the remote control to select the desired preset. For example, pressing the "Night light" button will set the brightness to 5% and color temperature to 3000K.
5. To switch the lamp on or off, use the respective buttons on the remote control.
Please note that the above instructions are based on the information provided in the product description. For more detailed instructions and safety guidelines, please refer to the user manual provided by Reality Leuchten GmbH.
Add New Comment