User Manual Q&AAnswer
Feb 09, 2025 - 08:51 PM
To assemble and install the Trio Phoenix LED ceiling lamp, please follow the instructions provided in the user manual. Here is a step-by-step guide:
1. Before starting the assembly, make sure to read and understand the safety instructions mentioned in the manual.
2. Begin by unpacking all the components of the lamp and ensure that you have all the necessary parts.
3. Locate the mounting bracket included in the package. This bracket will be used to attach the lamp to the ceiling.
4. Determine the desired location for the lamp on the ceiling. Ensure that the mounting surface is sturdy and capable of supporting the weight of the lamp.
5. Mark the positions for the mounting holes on the ceiling according to the dimensions specified in the manual. Use a level to ensure accurate alignment.
6. Drill the necessary holes in the ceiling at the marked positions.
7. Attach the mounting bracket to the ceiling using screws and wall plugs appropriate for your ceiling type. Make sure the bracket is securely fixed.
8. Connect the electrical wires of the lamp to the corresponding wires in the ceiling. Follow the wiring diagram provided in the manual and ensure proper insulation and connection.
9. Carefully attach the lamp body to the mounting bracket. Align the holes on the lamp body with the screws on the bracket and secure them in place.
10. Once the lamp is securely attached, insert the light source(s) into the lamp according to the instructions provided. Ensure that the light source(s) are compatible with the lamp and properly seated.
11. Finally, switch on the power and test the lamp to ensure it is functioning correctly.
If you encounter any difficulties during the assembly or installation process, it is recommended to consult a professional electrician or contact Trio Leuchten GmbH for further assistance.
Add New Comment