User Manual Q&AAnswer
Feb 09, 2025 - 08:41 PM
To assemble the BOSCH 23, 26 Easy Grass Cut, follow these steps:
1. Connect the shaft: Remove the transport safety and connect the individual parts of the shaft until they engage.
2. Mount and adjust the handle: Press the buttons on the handle and move it to the desired position. Release the buttons to lock the handle in place.
3. Mount the protection guard: Position the protection guard on the trimmer head and fasten it with the provided xxxx . Pull the plant-protection frame to the working position.
4. Dismount the spool, wind up the cutting line, and mount the spool: Press both latches of the spool cover together and remove the spool cover. Remove the empty spool. Cut off approximately 4.0m of line from the refill roll. Slide one end of the cutting line into the hole for line wind-up in the spool and wind up the line uniformly and tightly. Slide the other end of the cutting line through the hole for line guiding in the trimmer head and mount the spool back into the trimmer head. Affix the spool by mounting the spool cover.
Please refer to the provided illustrations in the manual for a visual guide on the assembly process.
Add New Comment