User Manual Q&AAnswer
Feb 09, 2025 - 08:32 PM
To install the V-TAC 80133970 Solar Wall Light, please follow these steps:
1. Drill the holes in the wall at the desired installation location.
2. Fix the bracket onto the wall using screws.
3. Fix the lamp body onto the bracket and tighten the screws.
4. Fix the plate cover onto the bracket to cover the screws.
5. Ensure that the luminaire is in the correct angle to receive sunlight.
6. After installation, test the light using the remote control.
7. The remote control has an operation distance of 3-5 meters.
Please note that installation must be performed by a qualified electrician. It is also important to replace any cracked protective shield and keep the light away from fire and water. The luminaire should not be installed in low-lying areas to avoid soaking.
For further information and troubleshooting, please refer to the V-TAC 80133970 Solar Wall Light Installation Guide provided with the product.
Add New Comment