User Manual Q&AAnswer
Feb 09, 2025 - 08:20 PM
To install the super bright LED WSR LED Wall Sconce Light, please follow these steps:
1. Turn off the breaker to remove the supply power from the circuit.
2. Attach the provided mounting plate to the junction box. Make sure the grounding xxxx is facing outward and the two fixture mounting xxxx holes align with the desired fixture orientation.
3. Connect the wiring.
4. Place the fixture over the mounting plate, aligning the two mounting xxxx holes on the plate with the two xxxx holes on the fixture. Secure it using the provided hardware.
Note: For a weatherproof seal, use silicone sealant around the base of the light where it meets the mounting surface.
5. Restore the supply power.
Please note that this is a general installation guide. It is essential to refer to the specific instructions provided in the user manual for your particular model, as there may be slight variations in the installation process.
For more detailed information and safety precautions, please refer to the super bright LED WSR LED Wall Sconce Light User Manual.
Add New Comment