User Manual Q&AAnswer
Feb 09, 2025 - 08:19 PM
To set the desired humidity level on the EUROMAC DryBest 10 and 20 dehumidifiers, follow these steps:
1. Press the ON/OFF button to turn on the appliance.
2. Use the "Higher" and "Lower" buttons to set the required air humidity between 30% and 90% (at intervals of 5%). The display will show the set air humidity for a few seconds, and then it will show the current air humidity.
3. Once the required level has been reached (± 2%), the compressor will stop, and the fan will stop 3 minutes later. If the air humidity rises once more to more than 3% above the set value, the appliance will start again. The compressor has a time lag of at least 3 minutes protection time between stopping and starting.
4. If you want the appliance to operate continuously, set the air humidity with the "Lower" button to "Co".
Please note that it is recommended to keep the humidity level between 45% and 65% for optimal health and protection of your possessions.
Add New Comment