User Manual Q&AAnswer
Feb 09, 2025 - 08:10 PM
To install the LFB-D Series LED Ready Deck Lights, follow these steps:
1. Ensure that you are familiar with and comply with all applicable national, state, and local building and electrical codes.
2. These lights are designed for use with OUTDOOR, low-voltage landscape lighting systems ONLY. They are NOT suitable for use with submersible or pool/spa equipment.
3. Do not submerge the lights in water, as it can cause damage.
4. These lights are intended for low voltage use only. Make sure that the power supply voltage matches the installed bulb.
5. The lights are designed for G4 bulbs (up to 20 W), which are not included. Install a compatible bulb in the light housing.
6. Before installation, remove the front light cover.
7. Mark and drill holes in the mounting surface according to the dimensional drawings provided in the manual.
8. With the supply power turned off, make the electrical connection.
9. Mount the light housing, using additional weatherproof sealant on the rear if necessary.
10. Once the light housing is securely mounted, reinstall the front light cover.
Please refer to the user manual provided by superbrightleds.com for more detailed instructions and safety information.
Add New Comment