User Manual Q&AAnswer
Feb 08, 2025 - 04:43 AM
To determine if the XPD2400 Transceiver Module is compatible with your host device, you need to ensure that the module meets the specific requirements and regulations outlined in the user manual. Here are the steps to follow:
1. Check the FCC and ISED Certifications: The XPD2400 Transceiver Module has been certified for FCC and ISED as a portable single-modular transmitter. Verify that your host device complies with the applicable FCC rules (Title 47 CFR Subpart C Part 15.203, Part 15.247, Part 15.205(a), Part 15.209(a) & 15.247(d), and 15.33(a)(1)) and ISED rules (RSS-Gen Issue 5 Section 7.1.2, RSS-247 Issue 2 (5.1) (a), (b), and (c), RSS-Gen Issue 5 (8.9), (8.10)).
2. Ensure Antenna Compatibility: The XPD2400 Transceiver Module is designed to be used with specific antennas that have been certified with the module. Check if your host device uses one of the antennas listed in Table 1 of the user manual. If you want to use a different antenna, it must be approved through a Class II Permissible Change.
3. Review RF Exposure Information: The XPD2400 Transceiver Module has specific RF exposure requirements for both mobile and portable applications. Ensure that your host device meets the minimum distance requirements between the antenna and any user or member of the public as specified in the manual.
4. Label and Compliance Information: If the XPD2400 Transceiver Module is not visible when installed inside the host device, the host product must display a label indicating the presence of the module. Verify that your host device includes the appropriate FCC and ISED labels as mentioned in the manual.
By following these steps and referring to the user manual, you can determine if the XPD2400 Transceiver Module is compatible with your host device. It is essential to comply with the regulations and requirements to ensure proper operation and adherence to FCC and ISED guidelines.
Add New Comment