User Manual Q&AAnswer
Feb 08, 2025 - 04:34 AM
To assemble the SUN JOE SBJ605E 3-In-1 Electric Blower-Vacuum-Mulcher, follow these steps:
1. Assemble as a Blower:
a. Slide the blower tube forward until it clicks into the slot on the blower housing.
b. Insert the concentrator nozzle onto the end of the blower tube until it locks into position.
c. Securely fasten the inlet cover over the air inlet until the lock button snaps into the locked position.
2. Assemble as a Vacuum/Mulcher:
a. Slide the front and rear vacuum/mulcher tubes together until the lock button engages.
b. Slide the inlet cover lock button forward to disengage the inlet cover. Hold the cover open.
c. Insert the "hooked" side end of the vacuum/mulcher tube into the rear clip on the unit. Push the "wedged" side end of the vacuum/mulcher tube up until the lock button snaps into the locked position.
d. Insert the collection bag adaptor into the blower air outlet until the collection bag is securely fastened. Clip the bag to the strap holder.
e. Attach the wheel assembly by pressing the button on the wheel assembly and sliding it onto the lead rail. Adjust the wheel position as desired.
3. To remove the blower tube or vacuum/mulcher tubes, turn the ON/OFF power switch to the OFF position and disconnect the tool from the power supply. Press the tube release button and remove the tube.
Please refer to the user manual for detailed instructions and illustrations.
Add New Comment