User Manual Q&AAnswer
Feb 08, 2025 - 04:28 AM
To mount and install the SOMOGYI ELEKTRONICS FKF 54203 Smart Wall Fan Heater, follow these steps:
1. Carefully remove the packaging material from the heater, ensuring not to damage the appliance and power cable.
2. Choose a suitable location for wall mounting, considering the minimum mounting distances indicated in Figure 2 of the instruction manual. Do not place the heater directly below a wall outlet.
3. Drill holes into the wall, at least 200 cm from the floor, along a horizontal line, and 325 mm from each other.
4. Insert the wall studs into the holes and drive the provided screws into the studs, leaving the xxxx heads extending approximately 10 mm from the wall surface.
5. Hang the rear panel of the heater onto the xxxx heads at the holes and let it down until it stops. Ensure that the heater is securely hanging on the wall.
6. Connect the power cable of the heater into a standard grounded wall outlet.
Please refer to the instruction manual for additional safety precautions and illustrations (Figure 2) to ensure proper installation.
Add New Comment