User Manual Q&AAnswer
Feb 08, 2025 - 04:21 AM
To install the handlebar tube on the HITWAY BK8 Electric Bike, please follow these steps:
1. Put the headset dust cap on the frame head tube.
2. Insert the handlebar tube into the frame head tube, making sure not to twist the wire harness.
3. Pre-tighten the screws with the No. 6 Allen key from the 16-in-1 tool. Do not tighten them too tight at this stage.
4. Adjust the relative parallelism between the handlebar, front fork, and frame.
5. Tighten the screws with the No. 6 Allen key in the 16-in-1 tool.
6. Fasten the tube xxxx plug.
7. Rotate the handlebar clockwise or counterclockwise to adjust it to a suitable angle.
8. Use the No. 6 Allen key in the 16-in-1 tool to tighten the screws and lock the handlebars securely.
Please refer to the user guide for visual illustrations and additional information on installing other components of the HITWAY BK8 Electric Bike.
Add New Comment