User Manual Q&AAnswer
Feb 08, 2025 - 04:04 AM
To connect the QTX 152.747UK Mini Animation Laser to a DMX controller, follow these steps:
1. Connect the DMX signal source to the DMX input on the unit using a balanced XLR lead.
2. If you have additional fixtures that you want to control with the same DMX signal, you can loop through the DMX out on the unit.
3. To enter DMX mode, press the "MENU" button on the unit to enter the settings menu.
4. Use the "UP" and "DOWN" buttons to navigate to the "Addr" function in the menu.
5. Press "ENTER" to select the "Addr" function.
6. Use the "UP" and "DOWN" buttons to set the desired DMX start address.
7. Press "ENTER" to confirm the setting.
8. The LED display will begin to flash the letter "A" to indicate that the unit has received the DMX signal from the controller.
Please refer to the manual for more information on the DMX channels and functions available for controlling the QTX 152.747UK Mini Animation Laser.
Add New Comment