User Manual Q&AAnswer
Feb 08, 2025 - 03:58 AM
The Dometic DuraCUBE-500 can be charged in two ways: with an AC cable or with a solar panel.
To charge with an AC cable:
1. Plug the charging cable into a wall outlet.
2. Connect the other end of the cable to the AC Input Port on the portable power station.
3. The LCD display will show the charging state if connected properly.
To charge with a solar panel:
1. Place the solar panel in direct sunlight.
2. Connect the solar panel to the solar charging port on the side of the power station using the solar charging cable.
3. The LCD display will show the charging indicator when the solar panel is connected properly.
4. The integrated solar charge controller will stop charging when the battery is fully charged.
Note: Only use the charger cable supplied by Go Power! for charging. The solar input should not exceed 22V. It is recommended to use a DuraLite Expansion Panel for charging the DuraCUBE.
For more information and troubleshooting, refer to the "Charging" section in the Dometic DuraCUBE-500 Portable Power Station User Manual.
Add New Comment