User Manual Q&AAnswer
Feb 08, 2025 - 03:52 AM
To connect the Angels Horn H019 Hi-Fi Bluetooth Turntable to external speakers, follow these steps:
1. Set the pre-amplifier selector switch on the turntable to the appropriate position based on the type of connectable equipment you are using (amplifier, active speakers, etc.). Refer to the "Connection to External Speaker with RCA Audio Cable" section in the user manual for the correct position.
2. Use an RCA audio cable (not included) with one red jack for the right channel and one white jack for the left channel.
3. Plug one end of the RCA audio cable into the AUX OUT jack on the turntable.
4. Connect the other end of the RCA audio cable to the input jack on your external speakers or amplifier.
5. Power on the turntable and your external speakers or amplifier.
6. Adjust the volume level on the turntable as needed.
Please note that the RCA jacks on the turntable are not designed to be connected directly to passive/unpowered speakers on LINE mode. If you connect the turntable to passive speakers, there will be no sound.
Add New Comment