User Manual Q&AAnswers
Feb 08, 2025 - 03:50 AM
To change the door opening direction on the , follow these steps:
1. Ensure the refrigerator is unplugged and empty.
2. Locate the hinge cover on the top of the refrigerator door.
3. Use a flathead screwdriver or a coin to remove the hinge cover by gently prying it off.
4. Once the hinge cover is removed, you will see the hinge pin.
5. Carefully remove the hinge pin by tapping it out with a hammer and a small nail or punch.
6. Once the hinge pin is removed, lift the door off the bottom hinge.
7. Place the door on a soft surface to prevent scratching.
8. Remove the bottom hinge by unscrewing the screws that hold it in place.
9. Move the hinge to the opposite side of the door.
10. Secure the hinge with the screws.
11. Lift the door and align it with the bottom hinge.
12. Insert the hinge pin back into the hinge and tap it in with a hammer until it is fully seated.
13. Replace the hinge cover by snapping it back into place.
14. Plug in the refrigerator and ensure it is level.
15. Test the door opening to confirm it is now opening in the desired direction.
Please note that these instructions are a general guide, and it is always recommended to refer to the user manual for specific instructions and illustrations for your model.
Feb 08, 2025 - 03:51 AM
To change the door opening direction on the , follow these steps:
1. Ensure the refrigerator is unplugged and empty.
2. Locate the hinge cover on the top of the refrigerator door.
3. Use a flathead screwdriver or a coin to remove the hinge cover by gently prying it off.
4. Once the hinge cover is removed, you will see the hinge pin.
5. Carefully remove the hinge pin by tapping it out with a hammer and a small nail or punch.
6. Once the hinge pin is removed, lift the door off the bottom hinge.
7. Place the door on a soft surface to prevent scratching.
8. Remove the bottom hinge by unscrewing the screws that hold it in place.
9. Move the hinge to the opposite side of the door.
10. Secure the hinge with the screws.
11. Lift the door and align it with the bottom hinge.
12. Insert the hinge pin back into the hinge and tap it in with a hammer until it is fully seated.
13. Replace the hinge cover by snapping it back into place.
14. Plug in the refrigerator and ensure it is level.
15. Test the door opening to confirm it is now opening in the desired direction.
Please note that these instructions are a general guide, and it is always recommended to refer to the user manual for specific instructions and illustrations for your model.
Add New Comment