User Manual Q&AAnswer
Feb 08, 2025 - 03:41 AM
To mount the Edge-core EAP102 Dual Band WiFi 6 Indoor Access Point, you have two options:
1. Mounting on a Wall:
a. At the installation location on the wall, set two screws in the wall 128 mm (5.0 in.) apart using the screws and wall plugs included in the package.
b. Slide the AP's wall mounting slots down onto the screws to secure the unit.
2. Mounting on a T-Bar:
a. Slide the bracket accessory onto the base of the AP until it clicks into its locked position.
b. Position the ceiling-mount clip holders on either side of the T-bar and then turn the AP until the two clips lock it to the T-bar.
For more detailed instructions and illustrations, please refer to the "Mount the AP" section in the Edge-core EAP102 Dual Band WiFi 6 Indoor Access Point User Guide.
Add New Comment