User Manual Q&AAnswer
Feb 08, 2025 - 03:32 AM
To properly install the LEDone LOC-SQCP-MWMCCT Series LED fixture, please follow these steps:
1. Read the installation instructions carefully before attempting to install the fixture.
2. Ensure that all wiring is performed by a qualified electrician.
3. Disconnect power before installing or servicing the fixture.
4. Wire the fixture in accordance with the National Electrical Code and applicable local codes and ordinances.
5. Proper grounding is required for personal safety.
6. This fixture is designed for outdoor use and should not be used in areas with limited ventilation or high ambient temperatures.
7. Before installing or maintaining the fixture, make sure the power is turned off. There are no user serviceable parts inside.
8. Clean the glass lens with a non-abrasive cleaning solution. Do not clean or maintain the fixture while it is energized. Do not open the fixture or touch the LED.
9. Check the line voltage at the fixture to ensure it is correct. Refer to the wiring directions.
10. Make sure the fixture is properly grounded.
11. Mount the fixture by installing the mounting plate to a sturdy mounting surface and tightening the screws.
12. Hang the fixture on the square mounting bracket and connect the wires correctly.
13. For pendant mounting, feed the fixture wires through the pendant pipe and mount the pipe into the top of the fixture.
14. The fixture has a universal voltage driver that allows operation at 120V through 277V, 50/60Hz. Connect the black fixture lead to the (+) live line supply lead, the white fixture lead to the (-) common supply wire, and the ground wire from the fixture to the supply ground.
15. If using 0-10V dimming, follow the wiring instructions in Figure 3 of the manual.
16. If your model has wattage and CCT adjustable functions, you can adjust them by unscrewing the G1/2 cover on the fixture side, selecting the desired wattage and CCT, and then screwing the cover back on.
Please refer to the LEDone LOC-SQCP-MWMCCT Series LED Installation Guide for more detailed instructions and illustrations.
Add New Comment