User Manual Q&AAnswer
Feb 08, 2025 - 03:26 AM
To replace the light source in the Paulmann 936 Series Recessed Light LED, please follow these steps:
1. Ensure that the power to the luminaire is turned off before attempting any maintenance or replacement.
2. Locate the light source within the luminaire. In the case of the Paulmann 936 Series, the light source is replaceable.
3. Depending on the specific model, the light source may be accessed by removing a cover or trim ring. Refer to the installation instructions provided in the box for guidance on accessing the light source.
4. Once the light source is accessible, carefully remove it from the luminaire. Take note of the type of light source used (e.g., LED bulb) to ensure you purchase a compatible replacement.
5. Install the new light source by inserting it into the designated socket or holder. Make sure it is securely fitted.
6. If necessary, reattach any covers or trim rings that were removed earlier.
7. Finally, turn on the power to the luminaire and test the new light source to ensure it is functioning properly.
Note: If you are unsure about any step or feel uncomfortable performing the replacement yourself, it is recommended to consult a qualified electrician who can safely replace the light source without permanently damaging the luminaire.
Add New Comment