User Manual Q&AAnswer
Feb 08, 2025 - 03:23 AM
To level the bed on the Ender-3 E 3D Printer, follow these steps:
1. Make sure there is no residual filament on the nozzle to avoid affecting the leveling accuracy.
2. Before auto leveling, ensure that the height error of the four corners of the print platform is less than 5 mm.
3. Select "Restore Default settings" and then select "Store Settings" to reset the printer.
4. Choose "Level Bed" and select "Probe Z Offset" to adjust the first layer print height.
5. Adjust the height of the nozzle by making sure the distance between the nozzle and the platform is about the thickness of an A4 sheet of paper.
6. Click "Store settings" to save the adjustments.
7. During printing, you can still select "Probe Z Offset" to fine-tune the nozzle height for the best printing effect.
Please refer to the Ender-3 E 3D Printer User Manual for more detailed instructions and illustrations.
Add New Comment