User Manual Q&AAnswer
Feb 08, 2025 - 03:15 AM
To set up the Zoinks Starfish Lagoon Playset, follow these steps:
1. Unfold the Starfish Lagoon base.
2. Place the included stand under the slot in the Starfish Lagoon base.
3. Fill the Play Pools with clean water.
4. Add 1 x 5g packet of Solution Mix and 250ml clean water to the Solution Pool on the Starfish Lagoon Base. Stir until the Solution Mix is completely dissolved in the water. Remember to store the Solution in a safe location and cover it when not in use. Do not add more water when reusing the Solution.
5. Before starting, remove the sealing plug under the cap of each Gelz squeeze bottle. Unscrew the Gelz bottle cap, remove the plug, and replace the cap.
6. Choose a Gelz bottle and gently twist the cap counterclockwise to open. Be careful not to pull the cap off.
7. Select a dry character mould and carefully squeeze the colored gel into the mould. You can layer different Gelz colors on top of each other. Avoid overfilling the mould.
8. After completing your creation, close the Gelz bottle by gently twisting the cap clockwise.
9. Place the Gelz-filled mould, creation side up, into the Solution, submerging it completely. While submerged, gently wiggle the mould from side to side. After 10-30 seconds, you will see your creation start to come away from the mould and float into the Solution. Allow it to set.
10. After setting, remove the mould and leave your creation in the Solution mix for at least 15 minutes before removing. For fully set and squeezable creations, it is advised to leave them in the Solution overnight.
11. Once your creation has reached the desired firmness, transfer it into one of the Play Pools on the Starfish Lagoon Base filled with clean water. The firming process will stop once you take your creation out of the Solution.
Remember to store your creations in water to prevent hardening and shrinking. For more detailed instructions and safety information, please refer to the Zoinks Starfish Lagoon Playset Instruction Manual.
Add New Comment