User Manual Q&AAnswer
Feb 08, 2025 - 03:09 AM
To calibrate the Z-offset on the renkforce 2583518 FDM 3D Printer Pro 6+, please follow these steps:
1. Insert the print bed and magnetic mat.
2. Open the menu Tools on the printer's display.
3. Touch the button Preheating to start the pre-heating process and wait until the preheat temperature has been reached.
4. Open the menu Manual on the display.
5. Use the touch controls to move the extruder to its zero position.
6. Activate the Z-offset calibration with the slider on the display.
7. Touch the distance increment 0.1 mm to activate it.
8. Slide one sheet of A4 paper (80 g) between the nozzle and the print bed.
9. Slide the paper back and forth while repeatedly touching the button or to lift or lower the print bed. If you notice slight resistance between the nozzle, paper, and print bed, touch the button to finish the calibration.
10. Confirm the Z-offset calibration on the display.
11. Touch the button Leveling to start the "Auto-leveling" process.
12. Wait for the "Auto-leveling" to finish.
Please note that these instructions are based on the information provided in the renkforce 2583518 FDM 3D Printer Pro 6+ User Guide. For more detailed instructions and illustrations, please refer to the user guide that came with your printer.
Add New Comment