User Manual Q&AAnswer
Feb 08, 2025 - 03:05 AM
Installation of TEKA Ceramic Hot Plates with Touch Control can be done using either the standard installation system or the fast-click system. Here are the step-by-step instructions for both methods:
Standard Installation System:
1. Ensure that the installation area is clean and free from any debris.
2. Place the hot plates on the countertop or the designated installation area.
3. Align the hot plates properly and ensure that they are level.
4. Connect the hot plates to the power supply using the provided power cord.
5. Make sure the power cord is securely connected to the hot plates and the power outlet.
6. Test the hot plates by turning them on and checking if they heat up properly.
Fast-Click System:
1. Clean the installation area thoroughly to remove any dirt or dust.
2. Place the fast-click brackets on the countertop or the designated installation area.
3. Align the hot plates with the fast-click brackets and ensure they are level.
4. Slide the hot plates into the fast-click brackets until they click into place.
5. Connect the hot plates to the power supply using the provided power cord.
6. Ensure that the power cord is securely connected to the hot plates and the power outlet.
7. Test the hot plates by turning them on and checking if they heat up properly.
Please note that these instructions are a general guideline and may vary slightly depending on the specific model of TEKA Ceramic Hot Plates with Touch Control. For more detailed and model-specific instructions, please refer to the installation guide provided with the product.
Add New Comment