User Manual Q&AAnswer
Feb 08, 2025 - 03:01 AM
To set the time and date on the La Crosse Technology 512-1422GRY Atomic Digital Wall Clock, follow these steps:
1. Insert 2-AA batteries into your Atomic Clock.
2. Enter the Settings Menu by holding the SET button until the display changes.
3. Use the + or - buttons to adjust the values. Hold the buttons to adjust quickly.
4. Press and release the SET button to confirm values and move to the next setting or exit the menu.
5. The Settings Menu order is as follows: Atomic Time ON/OFF, Time Zone, Daylight Saving Time ON/OFF, 12/24 Hour Time Format, Hour, Minutes, Year, Month, Date.
6. Adjust the settings according to your preferences.
7. Once you have set the time and date, the clock will automatically adjust to the Atomic Time Signal for accurate timekeeping.
Note: If you have selected Atomic OFF, the menu will skip the DST and Time Zone settings and move straight to the 12/24-Hour Time Format setting. If you live in an area that follows DST, keep the DST setting ON. If your area does not follow DST, turn the DST setting OFF.
For more detailed instructions and information, refer to the LA CROSSE TECHNOLOGY 512-1422GRY Atomic Digital Wall Clock User Guide.
Add New Comment