User Manual Q&AAnswer
Feb 08, 2025 - 02:49 AM
To ignite the burners on the Inspirados Toscana 30 Built-In Gas Oven, please follow these steps:
1. Make sure the gas supply is turned on and there are no interruptions in gas and electricity supplies.
2. Locate the control xxxx for the desired burner. The position of the corresponding gas burner is indicated on each control xxxx .
3. On models equipped with a safety device: Press and hold the control xxxx for approximately 6 seconds until the flame ignites and heats up.
4. On models equipped with a lighter: Press the electric power button first, identified by the symbol, then push and turn the corresponding xxxx counterclockwise to the "High" setting.
5. To light a burner: Simply press the corresponding xxxx and turn it counterclockwise to the High setting, then press and hold until the burner ignites.
6. If the flame accidentally goes out, turn off the gas with the control xxxx and wait at least 1 minute before attempting to relight the burner.
Please refer to the user manual for additional safety precautions and maintenance instructions for your Inspirados Toscana 30 Built-In Gas Oven.
Add New Comment