User Manual Q&AAnswer
Feb 08, 2025 - 02:35 AM
To install the Martec MMDC133MMR 1320mm 3 Blade Ceiling Fan, please follow the steps below:
1. Secure the ceiling fan mounting plate to the ceiling using the screws and washers provided. Make sure the screws are tightened on the mounting plate.
2. Align the hole in the motor housing with the hook on the mounting plate.
3. Connect the wires between the motor housing and the receiver of the remote control.
4. Before installing the motor housing into the mounting plate, put two screws halfway into two opposite xxxx holes.
5. Carefully install the motor housing into the mounting plate by pushing the two screws into the opening slot. Insert the remaining two screws and tighten all screws.
Please note that the installation of the ceiling fan must be carried out by a qualified and licensed electrician.
Add New Comment