User Manual Q&AAnswer
Feb 08, 2025 - 02:33 AM
To mount the monitor, follow these steps:
1. Start by removing the monitor, dash mount, and monitor antenna from the box.
2. Install the antenna into the open coaxial connector on the back of the monitor.
3. On the dash mount bracket, loosen the thumb xxxx behind the metal retention plate. There is also another hand xxxx on the base of the bracket for tilt adjustment if needed.
4. Slide the metal retention plate into the groove on the back of the monitor and hand tighten the thumb xxxx to secure it in place.
5. Find a desirable area on the dash or windshield for mounting. Make sure the area is flat enough and has enough space before removing the film from the suction cup base.
6. Once you have found your desired mounting location, clean the area well, remove the film, and mount the suction cup to the area.
Note: The monitor can be mounted on either the dash or windshield, depending on your preference and the layout of your vehicle.
For more detailed instructions and illustrations, please refer to the user manual provided with the product.
Add New Comment