How do I properly anchor the ShelterLogic 70656 10x10x8 Inch Greenhouse? (ShelterLogic 70656 8 Inch Greenhouse Instruction Manual)

Answer

manuals.plus

Feb 08, 2025 - 02:24 AM

Properly anchoring the ShelterLogic 70656 10x10x8 Inch Greenhouse is crucial for its stability and to prevent any potential damage. Here are the steps to anchor the greenhouse:

1. Choose a suitable location: Select a location that is flat and level, away from overhead utility lines, tree branches, or other structures that could shed snow, ice, or excessive runoff onto the greenhouse.

2. Consult local building codes: Before installation, consult with all local building codes regarding the installation of temporary greenhouses to ensure compliance.

3. Check for underground pipes or wires: Before digging, make sure to check for any underground pipes or wires to avoid damaging them.

4. Use additional anchors: For a stronger and more secure installation, ShelterLogic recommends using additional anchors. It is recommended to have one anchor for each foot plate.

5. Follow the anchoring instructions: Follow the specific anchoring instructions provided in the instruction manual to ensure proper installation. The manual should provide detailed steps on how to anchor the greenhouse securely.

Remember, failure to properly anchor the greenhouse may result in damage and will not be covered under the warranty. Periodically check the anchors to ensure the stability of the shelter. If strong winds or severe weather are forecasted, it is recommended to remove the cover.

For further assistance or clarification, you can contact ShelterLogic's Customer Service Hotline at the provided numbers during their hours of operation.