User Manual Q&AAnswer
Feb 08, 2025 - 02:21 AM
To install the EOOKE EO80032 Digital Frame Wall Mount, please follow the instructions provided in the installation guide. Here is a step-by-step guide for each wall bracket:
Wall Bracket I (For size 19”/22”/24”/27”/32”):
1. xxxx bracket 1 into the back of the EOOKE frame using a 6mm xxxx .
2. Drill 4 holes on the wall in the desired position.
3. Tap the plastic anchors into the wall at the drilled holes.
4. Attach and xxxx bracket 2 to the anchors on the wall.
5. Finally, attach the frame (bracket 1) to bracket 2.
Wall Bracket II (For size 43"/55"):
1. Attach the plates to the display using a screwdriver. Drive in Safety Screws halfway from the bottom of the plates.
2. Drill 4 pilot holes through the drywall and into the studs in the proper position.
3. xxxx the bracket to the wall using the pilot holes.
4. Attach the display (mounting plates) to the wall bracket.
5. Tighten the two Safety Screws to secure the display.
Please note:
- These instructions are specific to the EOOKE EO80032 Digital Frame Wall Mount and apply to the following models: EO80019/EO80022/EO80024/EO80032/EO80043/EO80055.
- If you are unsure about the installation process, it is recommended to seek the assistance of a qualified TV/Frame mounting service near you.
- For further information or assistance, you can visit the website www.digitalframe0.com.
Add New Comment