User Manual Q&AAnswer
Feb 08, 2025 - 01:46 AM
To switch on the DREMEL 910 Series Glue Gun, plug it into a standard 230V electrical outlet. Once plugged in, the glue gun will start heating up. For models 910, 920, and 930, there is no separate on/off switch. To switch off the glue gun, simply pull the mains plug.
For the Dual Temperature Glue Gun Model 930, there is a temperature switch (number 5 in Picture 1a/1b) that needs to be adjusted to either the low or high temperature setting to turn the glue gun on. Refer to the glue stick package to determine the appropriate temperature setting. To switch off the glue gun, pull the mains plug.
For Model 940, connect the power cord to the glue gun and switch it on with the main switch. The indicator light (number 6 in Picture 1c) will let you know that the glue gun is on and heating. To switch off the glue gun, switch it off with the main switch and pull the mains plug.
Remember to allow the glue gun to cool completely before storing it, as the hot nozzle can cause damage.
Add New Comment