Answer

Feb 08, 2025 - 01:42 AM
Setting up the FibroPool Cover Pump is quick and easy. Here are the steps:
1. Ensure that the pump is placed on a flat and stable surface near the pool or water source.
2. Attach the desired hose fitting (1/2", 5/8", or 3/4") to the pump outlet.
3. Secure the hose clamp around the hose fitting to ensure a tight connection.
4. Connect one end of the provided 6ft heavy-duty hose to the hose fitting on the pump.
5. Place the other end of the hose in the desired drainage area, making sure it is positioned to allow water to flow freely.
6. Plug the pre-installed power cable into a standard 110/120V electrical socket.
7. The pump will start automatically once it is plugged in. There are no switches to operate.
Please refer to the user manual for more detailed instructions and safety precautions.
Note: Always ensure that the pump is fully submerged in water before operating to prevent damage to the motor.
Add New Comment