User Manual Q&AAnswer
Feb 08, 2025 - 01:24 AM
To change the blade on the Einhell GC-PM Petrol Lawn Mower, please follow these steps:
1. Ensure that the engine is switched off and the spark plug boot is pulled before starting any maintenance work.
2. Tilt the lawn mower to the rear by pressing down the push bar.
3. Use a suitable tool to remove the blade. Be cautious as the blade may be sharp.
4. Inspect the blade for any damage or wear. If the blade is damaged or heavily worn, it should be replaced with a new one.
5. Install the new blade by aligning the mounting holes with the corresponding holes on the blade mount.
6. Secure the blade in place by tightening the bolts or fasteners.
7. Once the new blade is securely attached, set the lawn mower upright.
8. Test the blade by starting the engine and observing its operation. Ensure that the blade rotates smoothly and without any unusual vibrations.
Please refer to the Einhell GC-PM Petrol Lawn Mower Instruction Manual for more detailed instructions and safety precautions.
Add New Comment