User Manual Q&AAnswer
Feb 08, 2025 - 01:15 AM
To change the battery in the KaWe C10 LED High Power Otoscope, follow these steps:
1. For the EUROLIGHT/COMBILIGHT models, insert the battery or rechargeable battery into the handle. Make sure to check the correct polarity and the correct lamps (2.5 V or 3.5 V). Refer to Section 8: Maintenance and Service for more detailed instructions.
2. For the PICCOLIGHT model, insert two Mignon or AA 1.5 V batteries into the handle. Check the polarity. Follow the instructions in Section 8: Maintenance and Service for further guidance.
3. If you need to replace the batteries, unscrew the head from the handle for the PICCOLIGHT model. For the EUROLIGHT/COMBILIGHT models, refer to Section 8: Maintenance and Service for instructions on battery replacement.
4. It is recommended to use high-quality alkaline batteries or fully charged rechargeable batteries as replacements.
Please note that it is essential to follow the instructions in the User Manual for the specific model of the KaWe otoscope you are using.
Add New Comment