How do I wire the astro Kos Concrete Square Ceiling Lamp? (ASTRO Kos Concrete Square Ceiling Lamp Instruction Manual)

Answer

manuals.plus

Feb 08, 2025 - 01:09 AM

To wire the astro Kos Concrete Square Ceiling Lamp, please follow these steps:

1. Turn off the power: Before starting any electrical work, make sure to turn off the power supply to the area where you will be installing the lamp. This is crucial for your safety.

2. Identify the live, neutral, and earth wires: In most electrical systems, the live wire is normally brown or red, the neutral wire is normally blue or black, and the earth wire is normally green or yellow. Identify these wires in your electrical system.

3. Connect the wires: Once you have identified the live, neutral, and earth wires, connect them to the corresponding terminals on the lamp. The lamp should have labeled terminals for each wire.

4. Live wire: Connect the live wire from your electrical system to the live terminal on the lamp. This is the wire that carries the current.

5. Neutral wire: Connect the neutral wire from your electrical system to the neutral terminal on the lamp. This wire completes the circuit.

6. Earth wire: Connect the earth wire from your electrical system to the earth terminal on the lamp. This wire is for safety and grounding purposes.

7. Double-check the connections: After connecting the wires, double-check that all connections are secure and properly tightened. This is important to ensure a safe and reliable installation.

8. Turn on the power: Once you have completed the wiring, turn on the power supply to the area. Test the lamp to ensure it is functioning correctly.

Please note that these instructions are general guidelines. It is always recommended to consult a qualified electrician or refer to the specific instructions provided in the astro Kos Concrete Square Ceiling Lamp instruction manual for accurate and safe installation.