User Manual Q&AAnswer
Feb 08, 2025 - 01:06 AM
According to the instruction manual, the recommended filter replacement cycles may differ depending on the operating environment. The LED light on the control panel will indicate when you should check your filters. When replacing the filters, follow these steps:
1. Disconnect the power and wait until the fan has stopped.
2. Remove the pre-filter by the finger indent. Clean the pre-filter with a vacuum cleaner or with water depending on how dirty it is.
3. Remove the particle filter and handle the used filter carefully. Dispose of the filter in accordance with local environmental regulations in your country.
4. Clean inside, removing all dust and dirt.
5. Reconnect the power supply cord.
6. Press and hold the RESET button for 3 seconds. This will initialize the filter replacement cycle counter.
7. Insert the new particle filter.
8. Fix the pre-filter in place.
It is important to wash your hands thoroughly after replacing the filter. The exact frequency of filter replacement will depend on factors such as the level of air pollution in your area and the usage of the air purifier. It is recommended to refer to the LED light indicator and the filter replacement cycles mentioned in the manual to determine when to replace the filters.
Add New Comment