User Manual Q&AAnswer
Feb 08, 2025 - 12:56 AM
To assemble the SUNJOE 24V-CTC-CT Cordless Weed Sweeper, follow these steps:
1. Snap the guard onto the sweeper head and secure it with the two included thread-forming screws.
2. Insert the tightening rod through the hole in the spindle and lock it in place.
3. Place the small washer over the spindle, followed by either the nylon or wire brush and the big washer.
4. Tighten the components by hand using the wing nut, then remove the tightening rod to allow the spindle to rotate freely.
5. Open the cam lock on the pole assembly and insert the end of the sweeper head into the bottom of the pole assembly until they snap together.
6. Close the cam lock to secure the sweeper head in place.
7. To adjust the length of the pole, loosen the locking collar by turning it clockwise, then extend the pole to your desired length.
8. Twist the locking collar counterclockwise to tighten and secure the pole in place.
9. Attach the auxiliary handle to its mounting point on the pole using the included bolt and handle xxxx .
10. Adjust the angle of the auxiliary handle to your preference and tighten the handle xxxx to lock it in place.
For visual reference, please consult the illustrations provided in the instruction manual for the SUNJOE 24V-CTC-CT Cordless Weed Sweeper.
Add New Comment