User Manual Q&AAnswer
Feb 08, 2025 - 12:44 AM
To install the Apexcam TOUR-4 1080P Car Front Rear Dash Cam, follow these steps:
1. Start by attaching the suction cup mount to the windshield of your car. Make sure the surface is clean and dry before attaching the mount.
2. Connect the dash cam to the mount by sliding it onto the mount until it clicks into place.
3. Next, connect the car charger to the dash cam and plug it into the cigarette lighter socket in your car. The dash cam will automatically turn on when the car engine starts.
4. For the rear camera, position it on the rear windshield or rear window of your car. Use the provided cable to connect the rear camera to the main dash cam unit.
5. Adjust the angle of both the front and rear cameras to ensure optimal coverage.
6. Once the dash cam is installed, it will automatically start recording when the car engine starts and stop recording when the engine stops.
If you encounter any issues during the installation process, please refer to the user manual or contact Apexcam for further assistance.
Add New Comment