User Manual Q&AAnswer
Feb 08, 2025 - 12:41 AM
To connect the FIFINE K036 UHF Dual Channel Wireless Handheld Microphone to your speaker or amplifier, follow these steps:
1. Connect the AC adapter into the DC power connector on the back of the receiver. Then plug the AC adapter into an AC 120V/220V 50Hz outlet. Press the power button on the receiver to turn it on.
2. Use the provided 1/4" cable to connect the audio output on the receiver to the input on your amplifier or speaker. If your amplifier or speaker only has a 3.5mm input, use the provided 3.5mm to RCA cable to connect the receiver to your device.
3. Adjust the volume control for the A and B microphones on the receiver to set the desired volume level for each microphone.
4. If you want to add background music, you can connect your computer or phone to the audio input on the receiver using a 3.5mm cable. You can also adjust the volume of the background music on your computer or phone.
5. Finally, connect your speaker to the 3.5mm or quarter inch output on the receiver.
Note: It is important to turn down the volume level when first using the microphone and slowly adjust it to the appropriate level to avoid distortion. Also, make sure to turn off the microphone after use and remove the batteries to save power and prevent battery leakage.
Add New Comment