User Manual Q&AAnswer
Feb 08, 2025 - 12:07 AM
Sure! Here are the step-by-step instructions for assembling the Little Tikes Adventure Rocket:
1. Before you begin assembly, make sure you have all the parts listed in the instruction manual.
2. Start by applying the decals to a clean, dry surface. Wipe the surface clean with a dry rag before applying the decals. If the decals bubble, you can xxxx them with a pin to remove the air.
3. Turn the console (part K) over and insert the Control (part N2) through the control opening. Align the xxxx holes and secure using four 3/4" screws.
4. Insert the control xxxx with xxxx (part N1) onto the U control and secure using the xxxx .
5. Fit the bubble window wall (part D) into the center area on the wall base (part B).
6. Insert the handle (part V) into the bubble window wall.
7. Insert one tall wing (part H) into the circle door wall (part C). Then, insert the bubble circle door wall (part C) into the wall base (part B).
8. Insert the bubble window (part S) through the rocket ship and align the xxxx holes.
9. Slide in the mission control panel.
10. Assemble the nose cone onto the rocket and align the xxxx holes.
11. Secure the base of the rocket.
12. Attach the telescope and center wing.
13. Place the circuit panel (part P) onto the rocket wall and align the xxxx holes. Secure using four 3/4" screws.
14. Attach the circuit panel door.
15. Attach the hatch door.
16. Attach the final wings.
17. Before playing, an adult must install fresh alkaline batteries in the electronics module (part L). Use a Phillips screwdriver to remove the xxxx and battery compartment cover. Install three fresh 1.5V AA (LR6) alkaline batteries, making sure the (+) and (-) ends face the proper direction as indicated inside the battery compartment. Replace the compartment cover and tighten the screws.
If you have any further questions or need assistance, you can contact Little Tikes customer service at 1-800-321-0183.
Add New Comment